Quality assurance for Chinese herbal formulae: standardization of IBS-20, a 20-herb preparation

Background The employment of well characterized test samples prepared from authenticated, high quality medicinal plant materials is key to reproducible herbal research. The present study aims to demonstrate a quality assurance program covering the acquisition, botanical validation, chemical standardization and good manufacturing practices (GMP) production of IBS-20, a 20-herb Chinese herbal formula under study as a potential agent for the treatment of irritable bowel syndrome. Methods Purity and contaminant tests for the presence of toxic metals, pesticide residues, mycotoxins and microorganisms were performed. Qualitative chemical fingerprint analysis and quantitation of marker compounds of the herbs, as well as that of the IBS-20 formula was carried out with high-performance liquid chromatography (HPLC). Extraction and manufacture of the 20-herb formula were carried out under GMP. Chemical standardization was performed with liquid chromatography-mass spectrometry (LC-MS) analysis. Stability of the formula was monitored with HPLC in real time. Results Quality component herbs, purchased from a GMP supplier were botanically and chemically authenticated and quantitative HPLC profiles (fingerprints) of each component herb and of the composite formula were established. An aqueous extract of the mixture of the 20 herbs was prepared and formulated into IBS-20, which was chemically standardized by LC-MS, with 20 chemical compounds serving as reference markers. The stability of the formula was monitored and shown to be stable at room temperature. Conclusion A quality assurance program has been developed for the preparation of a standardized 20-herb formulation for use in the clinical studies for the treatment of irritable bowel syndrome (IBS). The procedures developed in the present study will serve as a protocol for other poly-herbal Chinese medicine studies.


Background
Herbal medicines, whether in the form of single herb phytomedicine or multiple herb mixtures, are popular around the world. However, evidence of efficacy and safety has not been well documented [1]. Lack of effective quality assurance affects the efficacy and safety assessment of herbal products [1][2][3][4][5][6][7]. For valid pharmacological or clinical efficacy evaluations, a standardized single batch clinical formulation should be employed. As part of a research project to evaluate the therapeutic potential of a 20-herb Chinese medicine formula (the IBS-20 formula) for treating irritable bowel syndrome (IBS), we have developed and tested a quality assurance program for the production of the multi-herb preparation. IBS affects 10-20% of the global population [8] and it has not been successfully treated with conventional medications such as bulking, smooth muscle relaxant, prokinetic and psychotropic agents, nor loperamide and peppermint oil [9].
We are presently conducting a clinical study of a 20herb Chinese medicine formula (IBS-20) to determine its efficacy potential in the treatment of this disorder. To insure the validity and reproducible results in conducting this study, we established a robust quality assurance (QA)/quality control (QC) program. The present paper describes the methods employed, covering all aspects of the production of IBS-20 from source material acquisition, botanical validation, chemical standardization, extraction and formulation. The protocols established in this study may be used as a model for the quality assurance of other herbal products.

Botanical authentication
All 20 herbs were authenticated macroscopically and microscopically. Macroscopic examinations included measurements of appearance, size, shape, color, texture, odor, taste, fracture and other characteristics of a herb according to pharmacopoeias [10][11][12][13]. Microscopic examinations determined characteristic elements of each herb in both tissue and powder forms. In cross sectional examination, herbal material was softened by immersion in water, alcohol or glycerin prior to sectioning. Sliced tissue, prepared with a microtome, was mounted on a glass microscope slide and clarified with chloral hydrate, lactochloral and/or sodium hypochlorite, followed by phloroglucinol, potassium iodide or Sudan Red. In powder analysis, each herbal material was pulverized to 65-mesh in size, mounted on a microscope slide, cleared with chloral hydrate, lactochloral and/or sodium hypochlorite, and then examined for the presence, size, shape and numbers of characteristic elements and inclusions such as vessels, calcium crystals, crystalline fibers, stone cells and starch grains. The examination protocols followed the World Health Organization (WHO) Quality Control Methods for Medicinal Plant Materials [14], the Pharmacopoeia of the People's Republic of China (CP) [10] and the Hong Kong Chinese Materia Medica Standards (HKCMMS) [11][12][13]. The recorded macroscopic and microscopic data for each herb were verified against those in the CP and/or the HKCMMS, coupled with visual comparison with available reference samples.

Reference marker compounds and reagents
Reference marker compounds for qualitative and quantitative high performance liquid chromatography (HPLC) were obtained from the National Institute for the Control of Pharmaceutical and Biological Products (Beijing, China) and further validated by mass spectrometry (MS) and nuclear magnetic resonance spectroscopy (NMR) and purity (>98%) analysis with HPLC and/or liquid chromatography-mass spectrometry (LC-MS). Chemicals and general solvents were of reagent grade and HPLC solvents were of HPLC grade (BDH, United Kingdom).

Chemical standardization
Chromatographic fingerprint analysis HPLC fingerprinting with one or more reference markers was carried out according to the HKCMMS and/or CP [10][11][12][13]. As an example, the procedure used for Rhizoma Coptidis (Huanglian) is described here. The herb was ground to powder, extracted in MeOH by ultrasonication for 30 minutes and filtered. The chromatographic system consisted of an Agilent 1100 HPLC system (Agilent Technologies, USA) equipped with a secondary pump, a diode-array detector, an autosampler, and a column compartment, an Alltech Alltima C18 column (4.6 × 250 mm) (Alltech, USA) packed with 5 μm diameter particles and an Alltech Alltima guard column (7.5 × 4.6 mm, 5 μm) (Alltech, USA); solvent system: 0.1% trifluoroacetic acid (%, v/v) (A) and acetonitrile (%, v/v) (B) with a linear gradient elution, 0% B-50% B at 0-48 minutes, 50% B-100% B at 48-55 minutes, 100% B was held for five minutes; flow rate: 1.0 ml/min; detection: 346 nm; reference marker: berberine. Information of the reference marker compounds for each herb is available in Additional File 1.

Quantitative analysis
Quantitative determination of selected marker compound (s) in each herb was performed with HPLC analysis. As an example, the quantitative analysis of Cortex Magnoliae Officinalis (Houpo) is described here. Preparation of the herb and the HPLC setup were the same as described above. The mobile phase contained 0.4% formic acid and acetonitrile (35:65); flow rate: 1 ml/min; detection: 294 nm. Information of the reference marker compounds for each herb is available in Additional File 1.

Inter-laboratory methods validation
Inter-laboratory validation of fingerprint and quantitative HPLC analytical protocols were carried out in laboratories at the Chinese University of Hong Kong and the University of Western Sydney prior to use. Both laboratories followed the identical experimental protocols and the results were critically compared.

Production of herbal extracts and the IBS-20 formula
The 20 dried herbs were individually reduced in size by milling or slicing and mixed in the prescribed proportion (% w/w), followed by extraction with water under GMP at the Hong Kong Institute of Biotechnology (Hong Kong Special Administrative Region, China). Briefly, the herb mixture (400 kg) was decocted with 10fold (w/v) of boiling distilled water for 60 minutes, cooled and collected. After fresh boiling water was added, the mixture was decocted for a second time. The cooled extracts were pooled, filtered, concentrated and spray dried to obtain a powder (34% yield w/w based on raw herbs). An aliquot was set aside for chemical and pre-clinical biological studies. The remaining powdered extract was then formulated with water-soluble starch (excipient) in a ratio of 1:1 into the clinical product in the form of an aluminum foil packed sachet.

Chemical standardization of the IBS-20 formula
Chemical standardization of the clinical herbal extract with selected reference markers was performed with HPLC coupled with diode array detection and atmospheric pressure chemical ionization mass spectrometry (HPLC-DAD-APCIMS) analysis. Briefly, the powdered extract was sonicated in MeOH for 30 minutes and filtered through a cellulose syringe filter. An aliquot (10 μl) of filtrate was injected into an Agilent 1100 HPLC system equipped with an Alltech Alltima C18 column (4.6 × 250 mm, 5 μm diameter). The mobile phase consisted of 0.1% trifluoroacetic acid in water (v/v) (A) and acetonitrile (B) with the gradient elution conditions as follows: 12% B-13% B at 0-10 minutes, 13% B -16% B at 10-40 minutes, 16% B-36.4% B at 40-67 minutes, 36.4% B-60% B at 67-100 minutes, from 100-120 minutes a gradient was applied to 100% B and was held for five minutes, followed by a 10-minute equilibration period at 12% B; flow rate: 1.5 ml/min; temperature: 27.5°C (constant). For detection, an Agilent 1100 series LC/ MSD trap (Agilent Technologies, USA) was connected to the HPLC system via an APCIMS interface. Ultrahigh purity helium was used as the collision gas and high purity nitrogen as the nebulizing gas. The optimized parameters in the positive ionization mode were as follows: nebulizer gas pressure: 50 psi; dry gas flow: 5.0 l/min; dry temperature: 350°C; vaporizer temperature: 400°C; full-scan MS analysis in the range of m/z 100-2200. The reference marker compounds present in the sample were identified by retention time, MS fragmentation and UV spectra.

Stability monitoring
The stability of the chemically standardized herbal formula was monitored in real time over a period of at least one year. The HPLC fingerprint profiles as well as the quantitative content of eight selected major marker compounds in the clinical formula were measured on days 0, 2, 3, 7, 14, 30, 60, 90, 180, 360, 450 post-production with HPLC and LC-MS respectively.

Results and discussion
During the selection of herbs, we paid special attention to the cases where the Chinese names correspond to more than one species. For example, Cortex Phellodendri refers to the bark of either Phellodendron amurense or Phellodendron chinense which are similar in macroscopic appearance and used interchangeably in Chinese medicine. Our studies in support of the HKCMMS [11] revealed significant differences in microscopic and chemical profiles of the two species using thin-layer chromatographic (TLC) and HPLC fingerprints as well as differences in contents using quantitative HPLC analysis. Microscopically, the cortex of Phellodendron chinense is broader than that of Phellodendron amurense (Figure 1), while the stone cells are more abundant and scattered in the outer layer of phloem of the former species (Figure 1a) but are sparsely scattered in the cortex of the latter (Figure 1b). Chemically, the marker compound profiles also differ significantly ( Figure 2). In Phellodendron chinense (Figure 2a), berberine predominates while palmatine is not discernible. On the other hand, both berberine and palmatine are present and appear to be similar in concentration in the cortex of Phellodendron amurense (Figure 2b). Thus, to ensure chemically and biologically reproducible batches, we decided to use the cortex of Phellodendron amurense in our preparation.
Purity rubric tests indicated that the herbs met the limits established by the CP and/or HKCMMS [10][11][12][13] (in the cases where regulatory standards are available) ( Table 1). Tests for contaminants showed that none of the 20 herbs exceeded the standards established by the CP and/or HKCMMS [10][11][12][13] (Table 2).
Each herb possesses a unique chemical profile of secondary metabolites which may be used as marker compounds for identification and standardization purposes. Some of these marker compounds have been related to the therapeutic efficacy of the herbs, as exemplified by our recent discovery of magnolol and honokiol as the active antispasmodic effects of Cortex Magnolia Officinalis [16]. Therefore, the marker content, especially that of biologically active compounds, may be used to confirm both the identity and quality of a herb. Additional File 1 summarizes the status of the qualitative (fingerprinting) and quantitative (HPLC) analyses of the herbs. Figure 3 shows the HPLC fingerprint of Rhizoma Coptidis as an example, whereas Table 3 provides the quantitative results of individual herbs. For those herbs that have CP and/or HKCMMS limits for the markers, the Inter-laboratory validation of fingerprint and quantitative HPLC demonstrated that the absolute deviation from mean (ADM) values of honokiol and magnolol in Cortex Magnoliae Officinalis were 0.43 and 1.11% respectively, confirming method reproducibility of the present study (Table 4). Similar results were obtained for all other herbs and no significant discrepancies were noted among the findings in Hong Kong and Australian laboratories.
The chemical standardization of the IBS-20 formula employed a HPLC-DAD-APCIMS system (Figure 4).
Mass spectral analysis revealed 20 marker compounds attributable to ten herbs, of which eight markers were sufficient for quantitative estimation ( Table 5). The fact that not all markers of the 20 herbs were detected was most likely due to low solubility of the lipophilic markers in the aqueous decoction. For the three herbs that have no established markers, namely, Rhizoma Atractylodis Macrocephalae, Semen Plantaginis, and Poria, no attempt was made to identify any ingredient from them.

Conclusion
A QA/QC program involving good supply practice acquisition, botanical validation, chemical profiling of the component herbs, as well as the establishment of a chemical standardization protocol and stability monitoring has been implemented on a 20-herb botanical preparation, the IBS-20 formula. The results of this study    Figure 4). Peaks 6, 10, 12, and13 were identified by LC-MS/MS2 analysis based on the literature values [17,18] and other peaks were identified by comparison of authentic chemicals. Jatrorrhizine and epiberberine (peaks 11, 12) were co-eluted with the same retention times. a Molecular or quasi-molecular ion peak; b FR: Fraxinus rhynchophylla; AS: Artemisia scoparia; PL: Paeonia lactiflora; SD: Saposhinikovia divaricata; GU: Glycyrrhiza uralensis; CR: Citrus reticulata; CC: Coptis chinensis; PA: Phellodendron amurense; SC: Schisandra chinensis; MO: Magnolia officinalis.
demonstrate that it is possible to establish a QA/QC program to monitor the quality of poly-herbal formulations employing botanical and chemical methods. In particular, the generation of a fingerprint HPLC chromatographic protocol in which the identities of a series of appropriate marker compounds, including relevant biologically active constituents, were identified for use in product standardization, coupled with a stability study procedure involving the LC-MS quantitation of major chemical markers, represent major advances in the development of quality control methods for poly-herbal Chinese medicine products for clinical studies and therapy.